What is the use of WiltAir products?

Wiltay products are efficient and reliable professional equipment, widely used in industrial, medical, scientific research and other fields. Check the connection and power supply before use, and be familiar with the operation procedure. Pay attention to avoid power failure, regular cleaning, comply with safety procedures, regular inspection of performance. In case of failure, check the power supply and connection first, and contact a professional or official customer service if necessary. Maintenance includes regular cleaning, lubrication and replacement of wearing parts.

Overview of WiltAir Products

With excellent performance and stable quality, Wiltai products have become an important tool for industrial manufacturing, helping enterprises to improve production efficiency.

In the medical field, Wiltai equipment with its accurate detection and efficient diagnostic function, to bring health protection for patients.

The field of scientific research is also inseparable from Wiltay, its innovative technology and rigorous experimental equipment, to promote the progress of scientific research.

Wiltay products, across a wide range of areas, to show its strong comprehensive strength, to become the majority of users trusted partners.

Overview of WiltAir Products

Our products cover a wide range of areas, including but not limited to industrial automation equipment, energy-saving equipment, environmental protection equipment, Committed to providing customers with comprehensive solutions.

Its outstanding product features, such as high precision, high stability, energy saving and environmental protection, as well as strong adaptability and reliability, Widely used in automotive, electronics, chemical, energy and other industries.

Weltai products not only meet the needs of the domestic market, but also exported to overseas, well received by users.

Preparation and inspection of products

Check every part to make sure it is in top condition.

Every screw, make sure.

Connect all necessary equipment to ensure.

Treat every detail and make the product flawless.

Preparation and inspection of products

Ensure that all power cords are tightly connected to avoid unsafe conditions caused by looseness.

Careful observation of the power socket, to ensure that it is not damaged, so as to avoid leakage accident.

Review all circuit connections to ensure that there is no sign of short circuit and ensure electrical safety.

Test the power switch to ensure that it works properly and avoid the danger caused by improper operation.

Check the equipment enclosure for damage and ensure that there is no exposed metal to prevent the risk of electric shock.

Preparation and inspection of products

Before starting any electrical equipment, be sure to check whether the supply voltage is consistent with the voltage value indicated on the product.

Ensure that power plugs and sockets match to prevent potential hazards caused by voltage discrepancies.

For some multi-voltage design equipment, carefully check the product specifications to ensure that the correct voltage level is selected.

Preparation and inspection of products

4. Go through it carefully first and don't skip any pages.

Don't wait for a problem to find out how the product works.

Follow the safety guidelines to ensure that each use is safe and secure.

Section 3 Basic Operation Steps of Product

1. Press the power button on the device.

Wait for the screen to light up and the indicator light to start flashing.

3. Observe whether the equipment is in standby mode and make sure everything is OK.

4. Adjust the volume of the equipment to the appropriate level as required.

5. Follow the on-screen prompts for the next step.

Section 3 Basic Operation Steps of Product

Tap the power button to start the device and make sure the power indicator lights up to indicate that the device is ready.

Place the product on a smooth desktop for stable operation.

Open the app and follow the prompts on the screen, entering the necessary personal information such as name and contact details.

After completing the initial Settings, select the required features and begin to enjoy the various features of the product.

In the course of operation, in case of any problems, you can always view the user manual for detailed answers.

Don't forget to turn off the application and power after the operation and make the device safe.

Section 3 Basic Operation Steps of Product

Before operation to ensure that the equipment has been turned on, press the start button, observe the indicator light on, confirm the equipment into the working state.

Adjust the brightness, rotate the brightness knob to a satisfactory level and adjust according to the ambient light.

To adjust the volume, press the volume plus or minus button to increase or decrease the volume as needed.

Switch mode, press the mode switch button, according to the needs to select the appropriate mode, such as automatic, manual and so on.

Adjust the temperature and turn the temperature knob to ensure the equipment is working in the proper temperature range.

After the completion of the above operation, check whether the operation of equipment is normal, if abnormal immediately stop use and contact after-sales service.

Section 3 Basic Operation Steps of Product

4. Before performing any operation, ensure that all Settings conform to the predetermined parameters and are adjusted in detail to ensure the accuracy of the operation.

5. Ensure the stable operation of the equipment and avoid operation interruption.

6. Ensure the accuracy of data collection.

7. Be informed of any anomalies.

8. To facilitate future enquiries and optimization.

Section 4 Points for Attention in Product Use

In the use of equipment, be sure to ensure that the power supply is stable, to avoid sudden power failure caused by equipment damage.

Do not plug the device while running in case of short circuit or data loss.

Regularly check the heat dissipation performance of the equipment to ensure good heat dissipation and avoid overheating.

According to the actual situation of equipment, reasonable adjustment of the use of the environment, in order to extend the life of equipment.

Section 4 Points for Attention in Product Use

Regular cleaning equipment to ensure that every part is a new look, this will not only extend the service life of the equipment, It can also ensure the best performance in each use.

Careful cleaning work, can not only remove stubborn stains, but also prevent the breeding of bacteria, to provide users with a healthy and comfortable environment.

Keep the equipment clean and tidy, let every operation become a kind of enjoyment, feel the convenience and warmth of technology.

Section 4 Points for Attention in Product Use

When using any product, be sure to carefully read and strictly comply with the product instructions in the safety procedures to ensure personal and property safety.

In the course of operation, we should pay special attention to the specific functions and limitations of the product, so as not to cause accidents.

Regular product safety inspection, found problems timely repair or replacement, to ensure the use of the process of safety.

Do not use the product for purposes other than the manual, so as not to cause damage or safety hazard.

Section 4 Points for Attention in Product Use

Enjoy the convenience of products, can not ignore the maintenance of equipment performance, pay attention to every detail of equipment operation, once detected any abnormal, Act now.

Equipment failures may accumulate into major problems, any concerns should be immediately fed back to after-sales service.

Contact with after-sales service in time, they will provide professional guidance to ensure that the equipment is always in the best condition.

Maintenance is not only part of equipment maintenance, but also the key to ensure the long-term use of products.

Section 5 troubleshooting

Encounter equipment can not start or performance degradation, first check the power supply and connection, to ensure that the power cord solid connection, socket no damage, power switch on, Check device connection ports, such as USB, HDMI, etc., to make sure there is no loose or damaged.

Check the internal hardware of the equipment is normal, open the back cover of the equipment, check whether the fan is rotating, whether the heat sink is clean, clean the dust or replace the fan.

If the above steps still do not resolve the problem, try to restart the device, if the problem persists, you can try to enter safe mode or restore the factory Settings, To troubleshoot the system software.

In the troubleshooting process, pay attention to observe whether the equipment has abnormal sound or heating phenomenon, to prevent equipment damage.

Equipment issued abnormal sound, need to stop immediately, seek expert support, safety first.

Signs of overheating can not be ignored, timely power failure, expert diagnosis is the key.

Ignore abnormal sound or high temperature, potential danger is approaching, professional maintenance can not be delayed.

Open the user manual and find the troubleshooting section.

Read the fault description carefully and look for entries that match the problem you encountered.

Follow the instructions in the manual and try to solve it step by step.

If you encounter unsolvable problems, consult the contact information provided in the manual.

During the solution, observe the changes in the equipment in order to better understand the problem.

After troubleshooting, conduct a comprehensive inspection of the equipment to ensure that the problem has been completely resolved.

In future use, when you encounter similar problems, you can refer again to the troubleshooting section in the user manual.

Section 5 troubleshooting

If you are unable to resolve the problem by yourself, please act immediately.

Wiltay official customer service on standby, authorized repair points everywhere.

Don't procrastinate and get in touch to get professional help.

Section 6 maintenance and repair

Regular cleaning of equipment, not only to remove dust and dirt, but also to prevent the accumulation of performance degradation, lubrication can reduce friction, Extend the service life of the equipment.

Keeping the equipment clean and lubricated is like breathing life into it. It keeps the equipment in the best condition for a long time.

Cleaning and lubrication may seem simple, but they are essential to the health and efficiency of the equipment.

Section 6 maintenance and repair

Regular and meticulous inspection of equipment to ensure that each component is in the best working condition.

Follow the detailed instructions in the product manual to clean and lubricate the equipment as necessary.

When replacing wearing parts, be sure to select high-quality parts that match the original recommendations.

Pay attention to observe the working condition of the equipment, once found abnormal, immediately stop inspection.

Record the details of each maintenance and replacement parts for follow-up.

Section 6 maintenance and repair

Regularly replace the filter, keep the air smooth, seals also need to be updated in time to prevent leakage.

When replacing the filter, pay attention to the selection of products that match the original model to ensure the normal operation of the equipment.

Seal replacement, need to carefully check the interface to ensure that no foreign body residue, to prevent the impact of sealing effect.

Section 6 maintenance and repair

Keep the working environment clean and tidy, dust and foreign matter once into the equipment, will not only affect the normal operation of equipment, and may even cause failure.

Details determine success or failure, every part of the equipment needs careful care, the cleanliness of the working environment can not be ignored.

Regular inspection, timely cleaning, to ensure that the equipment in the best condition, improve work efficiency, extend service life.